Bluetti AC200 Portable Power Station User Manual

Download PDF user manual for Shenzhen PowerOak Newener Bluetti AC200 Portable Power Station (EN) 16 pages 2020 zip

SKU: BLUETTIAC200UM Category: Brand:

Description

This PDF user manual is for the Bluetti (PowerOak) AC200 Portable Power Station.

Bluetti (PowerOak) AC200 Portable Power Station

The Bluetti AC200 solar power station will keep your gadgets and appliances going in the event the power goes out.

Please read this manual before use and follow its guidance. Keep this manual for future reference.

(PDF) USER MANUAL in English (EN) language.

CONTENTS:

– Safety instructions
– Packing list
– Function introduction
– Startup and shutdown operation. The LED indicator lamp status warning.
– How to use the touch screen
– The operation steps of touch screen
– Charging the product: From AC Wall outlet. From the solar panels. From the car lighter port. From a generator (gasoline, propane or diesel). From lead acid battery.
– Discharging
– Application scenario
– Examples of loads
– Estimation of operating time
– Specification: Output. Input. Battery Pack. General.
– Storage and maintenance instructions
– Declaration
– Common faults and troubleshooting

FAQ (Frequently Asked Questions):
– What is the depth of discharge (DoD)?
– To extend battery life, the portable power station has a DOD setting of 90%, which means that only 90% of the battery capacity can be discharged. Reserve 10% of the energy to avoid damage to the battery due to over discharge.

– Can Bluetti AC200 be charged and discharged at the same time?
– Yes, it supports pass through charging for both AC and DC loads. We recommend if you do this that you make sure to fully charge the AC200 at least once per month to extend battery life.

– Can AC output of Bluetti AC200 charge refrigerator, air conditioner or electric drill?
– Lower power for those devices can be charged. It is not recommended to use more than 1400W power. The starting power of refrigerator, air conditioner and electric drill is generally 5-7 times of the nominal power, which is easy to trigger AC overload.

– Can two Bluetti AC200 be used in parallel?
– No.

– Can I use third-party solar panels with Bluetti AC200?
– You can use any solar panels available as long as they have MC4 connectors and when wired together the voltage is between 35V to 150V and no more than 700W.

– How do I know if my appliance will work with Bluetti AC200?
– When figuring what appliances can be powered with your portable power station, you will need to calculate how much the continuous loads are of each appliance you want to run simultaneously to determine if the total amount of watts is within the capacity of the generator. You can find the wattage of the appliance by looking at the manufacturer’s information (this information is usually stamped or printed on most appliances and equipment) to measure it’s wattage. Add all wattages of appliances to be run to determine if the total amount of watts is within the maximum continuous and surge watts.

– Can I connect Bluetti AC200 to my home circult breaker box?
– Can not.

Why Download the Manual?

This user manual provides all the information from Bluetti PowerOak about the AC200 Portable Power Station, as detailed in the table of contents. Reading it completely will address most questions you might have. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

How to Download the Manual?

Download it by clicking the button below

Helped you out?
Glad to hear that. It would be awesome if you could . . .

Support teklib.com