Aeris Manta Watch Dive Computer Operating Manual

Description

This PDF operating manual is for the Aeris Manta watch dive computer.

Aeris Manta Watch Dive Computer

It is extremely important that you read this Operating Manual in sequence and understand it completely before attempting to use the Manta as a dive computer.
It is equally important that you read the AERIS Dive Computer Safety and Reference Manual (Doc. No. 12-7203) provided with your Manta. It contains information that you must become familiar with prior to diving with your Manta.
Remember that technology is no substitute for common sense, and a dive computer only provides the person using it with data, not the knowledge to use it.

(PDF) OPERATING MANUAL (EN)

CONTENTS:

INTRODUCTION AND GENERAL FEATURES AND DISPLAYS
– INITIAL ACTIVATION
– FULL LCD DISPLAY
– INTERACTIVE CONTROL CONSOLE
– OPERATING MODE STRUCTURE
– OPERATION AS A DIVE COMPUTER
– ACI (AERIS COMPUTER INTERFACE)
– SYMBOLS AND ALPHA NUMERIC GRAPHICS
– AUDIBLE ALARM
– BACKLIGHT
– POWER SUPPLY

WATCH FEATURES AND DISPLAYS
– LOCAL DEFAULT TIME
– MAIN TIME
– HOW TO SET MAIN TIME
– ALTERNATE TIME
– HOW TO SET ALTERNATE TIME
– COUNTDOWN TIMER
– HOW TO SET COUNTDOWN TIMER
– CHRONOGRAPH
– DAILY ALARM
– HOW TO SET DAILY ALARM

DIVE COMPUTER FEATURES AND DISPLAYS
– BAR GRAPH
– ALPHA / NUMERIC DISPLAYS. Depth. Time and Date. Temperature.

DIVE COMPUTER SURFACE SEQUENCE AND OPERATING MODES
– SURFACE MODE. Normal Surface Main. Normal Surface Main Button Operations. Normal Surface Alternate. Normal Surface Secondary.
– NORMAL AND GAUGE SURFACE SET MODES
– HOW TO SET F GROUP (FO2)
– How to set FO2
– How to set FO2 50% Default
– HOW TO SET A GROUP (NORM/GAUG ALARMS)
– How to set Audible Alarm
– How to set Depth Alarm
– How to set EDT (Elapsed Dive Time) Alarm
– How to set NIBG (Nitrogen Bar Graph) Alarm
– How to set DTR (Dive Time Remaining) Alarm
– How to set PO2 Alarm
– HOW TO SET U GROUP (UTILITIES)
– How to set Wet Activation
– How to set Units of Measure
– How to set NORM Safety Stop
– How to set Conservative Factor
– How to set Backlight Duration
– How to set Sampling Rate
– SERIAL NUMBER
– NORM (Normal Dive) PLAN MODE
– FLY MODE
– SAT MODE (NORM)
– NORM/GAUG LOG MODE
– HISTORY MODE (NORM/GAUG)

OVERVIEW OF DIVE MODE INFORMATION
– SYMBOLS AND ICONS
– DIVE TIME REMAINING (DTR). No Decompression Dive Time Remaining (NDC). Oxygen Accumulation Time Remaining (OTR).
– VARIABLE ASCENT RATE
– ELAPSED DIVE TIME
– CONTROL OF DISPLAYS
– WET CONTACTS

NORM DIVE MODE
– NORM NO DECOMPRESSION DIVE MODE. NORM Dive No Deco Safety Stop.
– DECOMPRESSION DIVE MODE
– VIOLATION MODES
– HIGH PO2
– HIGH OXYGEN ACCUMULATION
– SUMMARY OF WARNING AND ALARM MESSAGES

NORM POST DIVE MODES
– TRANSITION PERIOD
– AFTER THE TRANSITION PERIOD
– UPLOADING SETTINGS AND DOWNLOADING DATA

GAUGE OPERATING MODE
– GAUG SURFACE
– GAUG DIVE

FREE DIVE OPERATING MODE
– FREE SURFACE
– FREE COUNTDOWN TIMER (CDT)
– HOW TO SET FREE CDT
– HOW TO SET FREE ALARMS (EDT, FDA)
– FREE DIVE
– FREE DIVE ALARMS

REFERENCE
– CARE AND CLEANING
– INSPECTIONS AND SERVICE
– BATTERY REPLACEMENT
– ALTITUDE SENSING AND ADJUSTMENT
– ERROR DURING A DIVE
– CHARTS OF NO DECOMPRESSION LIMITS AT ALTITUDE
– CHART OF OXYGEN EXPOSURE LIMITS
– SPECIFICATIONS
– INSPECTION/ SERVICE RECORD

POWER:
– Battery 1 – 3 vdc, CR2430, Lithium battery
– Shelf life Up to 7 years (when shipped from factory in Deep Sleep mode)
– Replacement User replaceable (annual recommended)
– Use Life 1 year or 300 dive hours if 2 – 1 hour dives per dive day

This operating manual (as detailed in the table of contents) provides all the information from Aeris about the Atmos Pro Dive Computer. Reading this operating manual completely will address most questions you might have about this dive computer. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .