Aeris Elite T3 Dive Computer Operating Manual

Description

This PDF operating manual is for the Aeris Elite T3 dive computer.

Aeris Elite T3 Dive Computer

It is extremely important that you read this Operating Manual in sequence and understand it completely before attempting to use the Elite T3 as a dive computer.
It is equally important that you read the AERIS Dive Computer Safety and Reference Manual (Doc. No. 12-7203) provided with your Elite T3. It contains information that you must become familiar with prior to diving with your Elite T3.

Remember that technology is no substitute for common sense, and a dive computer only provides the person using it with data, not the knowledge to use it.

The documents listed below are for reference only. For specific operational details, consult the original paper documents included with your product.

(PDF) OPERATING MANUAL (EN)

CONTENTS:

– Warranty, Notices, Decompression Model
– FCC ID

INTRODUCTION AND GENERAL FEATURES AND DISPLAYS
– Interactive Control Console
– Operating Mode Structure
– Audible Alarm
– Smartglo Backlight
– Power Supply
– Bargraphs
– PC Interface
– Symbols And Alpha Numeric Graphics
– Alpha / Numeric Displays. Tank Pressure Display. Depth Displays. Air Time Remaining Display. Date, Time, and Temperature Displays. FREE Dive Mode Displays.

SURFACE SEQUENCE AND OPERATING MODES
– Operating Modes
– Surface Mode Norm (Normal) Surface Main Display. NORM Surface Main Button Operations. Elite T3 Battery Status. Transmitter Status.
– SET MODES
– SET F GROUP (FO2)
– How to set FO2 for NORM Nitrox Dives
– How to set F02 GAS 1
– How to set F02 GAS 2
– How to set F02 GAS 3
– How to set F02 50% Default
– SET A GROUP (NORM/GAUG ALARMS)
– How to set Audible Alarm
– How to set Depth Alarm
– How to set EDT (Elapsed Dive Time) Alarm
– How to set NIBG (Nitrogen Loading Bar Graph) Alarm
– How to set DTR (Dive Time Remaining) Alarm
– How to set Turn Pressure Alarm (TMT1)
– How to set End Pressure Alarm
– How to set PO2 Alarm
– SET U GROUP (UTILITIES)
– How to set Wet Activation
– How to set Units of Measure
– How to set NORM Safety Stop
– How to set Conservative Factor
– How to set Backlight Duration
– How to set Sampling Rate
– How to set TMT1 (Transmitter 1 Link Code)
– How to set TMT (Transmitter) 2-3 Use
– How to set TMT2/BUD1 (Transmitter 2 Link Code)
– How to set TMT3/BUD2 (Transmitter 3 Link Code)
– SET T GROUP (TIME/DATE)
– How to set Hour Format
– How to set Time
– How to set Date
– Serial Number (Elite T3)
– Norm Surf Alt Display (Surface Alternate)
– Norm Plan Mode
– Fly Mode
– Sat Mode (Desaturate)
– NORM/GAUG Log Mode
– NORM/GAUG History Mode
– Overview Of Displayed Symbols And Icons

OVERVIEW OF DIVE MODE OPERATION
– Positioning Of The Elite T3
– Link Interruption Underwater
– Dive Time Remaining (DTR)
– No Decompression Dive Time Remaining (NDC)
– Oxygen Accumulation Time Remaining (OTR)
– Air Time Remaining (ATR)
– Air Time Remaining Alarm
– Ascent Rate Alarm
– Control Of Displays
– Wet Contacts

NORM TYPE DIVE MODES
– Norm No Decompression Dive Mode. NORM Dive No Deco Safety Stop. Decompression Dive Mode.
– Violation Modes
– Norm High PO2
– High Oxygen Accumulation
– Summary Of Norm/Gaug Warning And Alarm Messages

SWITCHING GAS MIXES AND BUDDY PRESSURE CHECK
– Switching Gas Mixes (Norm Only)
– Buddy Pressure Check (Norm Only)

NORM POST DIVE MODES
– Transition Period
– After The Transition Period

GAUGE OPERATING MODE
– GAUG Surface Displays
– GAUG Dive Displays

FREE DIVE OPERATING MODE
– Free Surface Displays
– Free Countdown Timer (CDT)
– Set Free CDT
– Set Free EDT (ELAPSED DIVE TIME) ALARM
– Set Free Depth Alarms
– Free Dive Displays
– Free Dive Alarms
– Entry Into Deco During A Free Dive

REFERENCE
– Uploading Settings And Downloading Data. PC Compatibility Requirements.
– Care And Cleaning
– Inspectionsand Service
– Battery Replacement
– Installing A Transmitter On A Regulator
– Transmitter Compatibility With Nitrox
– Altitude Sensing And Adjustment
– Charts Of No Decompression Limits At Altitude
– Chart Of Oxygen Exposure Limits
– Specifications
– Inspection / Service Record

POWER
– Elite T3 Battery: 1 – 3 vdc, CR2450, Lithium battery
– Transmitter Battery: 1 – 3 vdc, CR2, 0.75 Ahr, Lithium battery (Duracell model DL-CR2 or equivalent)
– Shelf life: Up to 5 years
– Replacement: User replaceable (annual recommended)
– Use Life (Elite T3): 1 year or 300 dive hours if 2 – 1 hour dives per dive day
– Use Life (Transmitter): 300 dive hours if 2 – 1 hour dives per dive day

(PDF) ADDENDUM for ELITE T3 OPERATING MANUAL (Doc. No. 12-7201-r01) and REVIEW CARD (Doc. No. 12-7202-r01)

This operating manual (as detailed in the table of contents) provides all the information from Aeris about the Elite T3 dive computer. Reading this operating manual completely will address most questions you might have about this dive computer. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .