Aeris Atmos 2 Dive Computer Operating Manual

Description

This PDF operating manual is for the Atmos 2 dive computer.

Aeris Atmos 2 Dive Computer

Your ATMOS 2 presents the information that you need before, during, and after your air (or nitrox) dives using a combination of easy to read displays and identification icons. It can also be set to operate simply as a digital depth gauge/timer.

This instructional guide is intended to help you become familiar with the functions and features available and show you examples of displays that you could expect to see in the various operational modes.
Relax and read through the complete operating manual.

Remember that the rules you learned in your basic scuba certification coursc(s) still apply to the diving you will do while using a dive computer – some will become even more important.
Technology is no substitute for common sense, and a dive computer only provides the person using it with data, not the knowledge to use it.

WARNING: Prior to diving with the Atmos 2, you must also read and understand the AERIS Dive Computer Safety & Reference Manual, Doc. No. 12-7203, which provides Important Warnings and Safety Recommendations as well as general product information.

The documents listed below are for reference only. For specific operational details, consult the original paper documents included with your product.

(PDF) OPERATING MANUAL (EN)

CONTENTS:

– WARRANTY
– NOTICES
– DECOMPRESSION MODEL

FEATURES AND DISPLAYS
– Control Buttons
– Bar Graphs. Nitrogen Bar Graph. Oxygen (02) Bar Graph. Variable Ascent Rate Indicator.
– Informational Displays. Depth Displays. Time and Date Displays. Temperature Display.
– Audible Alarm
– LED Warning Indicator
– Backlight
– Power Supply. Battery Indicator. Low Battery Condition.
– FO2 Mode. FO2 50% Default.
– Dive Time Remaining

ACTIVATION AND SETUP
– Activation
– Surface Mode
– Set Modes. Entering Settings – Set Mode #1. Entering Settings – Set Mode #2.

PRE DIVE PLAN MODE
– Dive Planner

DIVE MODES
– Dive Mode Bar Graphs
– Control Of Displays
– No Decompression Dive Mode
– Decompression Dive Mode
– Violation Modes. Conditional Violation Mode. Delayed Violation Modes. Immediate Violation Mode and Gauge Mode.
– High PO2 Dive Mode
– High Oxygen Accumulation
– User Set Digital Gauge Mode

POST DIVE MODES
– Post Dive Surface Mode
– Transition Period
– After The Transition Period (The First 2 Hours)
– How to access the Dive Planner (Plan Mode)
– How to access the Time to Fly Countdown
– How to access the Time to Desaturate Countdown
– Log Mode
– After The First 2 Hours
– Downloading Data to a PC

RESET (CLEAR)

SIMULATOR (DEMO) MODE

GENERAL
– Care And Cleaning
– Inspections And Service
– Battery Replacement
– Altitude Sampling/Compensation
– Specifications

POWER
– Battery: 1 – 3 vdc, type CR2450 Lithium battery
– Shelf life: Up to 5 years
– Replacement: User replaceable (annual recommended)
– Life expectancy: 100 dive hours (if 1 – 1 hour dive per dive day) to over 300 dive hours (if 3 – 1 hour dives per dive day)

SERVICE RECORD

This operating manual (as detailed in the table of contents) provides all the information from Aeris about the Atmos 2 dive computer. Reading this operating manual completely will address most questions you might have about this dive computer. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .