Aeris A300 Dive Computer Operating Manual

Description

This PDF instruction manual is for the Aeris A300 Dive Computer with Free Dive Mode.

Aeris A300 Dive Computer with Free Dive Mode

The A300 model features FREE Dive mode as well as NORM, TECH, and GAUG modes.
The A300xt model features a Tank Pressure alarm (actuated by an reed switch) for an analog pressure gauge mounted in the same console as the dive computer module.
NORM mode is intended for the casual diver who plans to use a single gas and does not yet wish to configure the numerous settings and alarms, many are factory set at predetermined fixed values.
TECH mode allows the user to configure all settings and alarm values using the control buttons or PCI program, and set up and switch between multiple gasses.
GAUG mode is for those using the units as digital gauges with no Ni-O2 calculations.
FREE mode (A300 only) is for those using the unit for breath hold activities without scuba.

The documents listed below are for reference only. For specific operational details, consult the original paper documents included with your product.

(PDF) OPERATING MANUAL (EN) / MANUAL DE FUNCIONAMIENTO (ES) / MANUEL D’UTILISATION (FR) / MANUALE D’USO (IT)

CONTENTS:

NOTICES

FEATURES AND FUNCTIONS
– Display Icons
– Overview
– Activation & Diagnostics
– Audible Alarm
– PC Interface
– Power Supply & Battery Status. Power Saver Mode.

NORM/TECH SURFACE MODES
– Surf Main And Alts: Fly/Desat, Plan Mode, Log Mode, Set Groups, History Mode, ID – SN, Clear.

DIVE MODE FEATURES
– Wet Activation (Of Dive Mode)
– Smartglo Backlight
– Bar Graphs
– Dual Algorithm
– Conservative Factor
– Tech Deep Stop
– Safety Stop
– Dive Time Remaining (DTR): No Deco DTR (NDC). O2 DTR (OTR).
– Dive Mode Structure

NORM/TECH DIVE MODES
– No Deco Main And Alts
– Tech Deep Stop (DS)
– Safety Stop (SS)
– Decompression
– Violation Modes
– High PO2
– High O2

TECH DIVE GAS SWITCHING

GAUG OP MODE
– Surface Modes
– Dive Modes

FREE DIVE OP MODE
– Surface Modes
– Set Modes & CDT
– Dive Modes
– Alarms

REFERENCE
– PC Interface. PC Requirements.
– Care And Cleaning
– Inspections And Service
– Module Removal From Boot
– Battery Replacement
– Returning Module To Boot
– Altitude Sensing And Adjustment
– Analog Pressure Gauge (A300 XT Only)

POWER:
– Battery: (1) 3 vdc, CR2450, Lithium battery (Panasonic or equivalent).
– Shelf life: Up to 5 years.
– Replacement: User replaceable (annual recommended).
– Use Life: 1 year or 300 dive hours if (2) 1 hour dives per dive day.

TECHNICAL DATA
– DSAT Algorithm NDL Chart
– PZ+ Algorithm NDL Chart
– Specifications

INSPECTION/SERVICE RECORD

This user manual provides all the information (according to the table of contents) from Aeris about the A300 Dive Computer with Free Dive Mode. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .