Pecron E2000LFP Expandable Portable Power Station User Manual
Download User Manual for Pecron E2000LFP Expandable Portable Power Station 2000W/1920Wh [16 pages 2022 pdf/zip]
Pecron E2000LFP Expandable Portable Power Station | 2000W 1920Wh
Pecron E2000LFP utilizes premium LiFePO4 (lithium iron phosphate) batteries which can retain 80% of its original capacity at 3500 complete charge cycles; Cast in UL94V flame-retardant ABS plastic to provide added safety and durability; All ports are covered by high-grade TPU protective cap which is resilient to daily stretching and tearing.
E2000LFP can be expanded up to 8kWh with two EB3000 batteries; Bidirectional flow between the expansion battery and main unit allows you to charge the whole system from either side or both at the same time; Features 600W MPPT input port and USB, cigarette lighter and XT60(up to 30A) output ports make EB3000 itself an excellent back up battery.
Pecron E2000LFP has 16 output ports that can run up to 16 devices at a time. Including 6 x 2000W AC outlets, USB-C: PD100W x 1; USB-C: 18W x 1; USB-A: 18W x 1; 5V2A x 3; 1 x cigarette port, 2 x DC ports, and 1x 15W wireless charger, it’s an ideal all-in-one power solution for your phones, tablets, laptops, portable refrigerator, drones, camera, and more.
E2000LFP equips three independent built-in MPPT charge controllers, each supporting PV of 12V-95V (Voc: open circuit voltage) charging up to 600W: 12~18V – 100W(Max). 32~95V – 600W(Max) x 2; that support a maximum 1300W solar panels input. Utilizing Pecron latest UBSF charging technology to achieve a balance between speed and safety, it allows E2000LFP to be quickly recharged in just 2 hours without compromising its life cycles.
Please read the user manual thoroughly before using this product, and keep this manual in a safe place for future reference.
TABLE OF CONTENTS:
– Function Introduction
– Output Specs
– Input Specs
– How To Use The Pecron E2000LFP
– LCD Smart Display. Temperature Alarm Icon. AC Overload Alarm Icon.
– Expandable Battery
– Packing List
– Recharge Time
– Solar Charge Time
– Using Solar Panels To Charge Pecron E2000LFP. 1 x DC5521 Charging Port. 2 x GX16MF-5 Charging Port.
FAQS (Frequently Asked Questions):
Q: What kind of battery is used in Pecron E2000LFP? How long it can last?
A: E2000 LFP utilizes high quality UL certified automotive LiFePO4 battery, it can retain 80% of its original capacity at 3500 complete charge cycles.
Q: What devices can Pecron E2000LFP power?
A: E2000 LFP can power most devices with power consumption less than 2000 watts.
Q: Can the Pecron E2000LFP be used as UPS?
A: The UPS function is not supported.
Q: Can the Pecron E2000LFP be charged while discharging?
A: Yes, E2000 LFP can run devices while it is being charged. The battery will eventually run out if the discharging is greater than the charging during the pass through charging.
Q: How to calculate the Pecron E2000LFP running time?
A: Running Time=Total Capacity(1920Wh) * 0.85 (Depth of Discharge)/Loading Power(Watts)
Q: Can I use the Pecron E2000LFP indoors and charge the Pecron E2000LFP indoors?
A: Yes, the E2000 LFP is safe to use indoors.
Q: Does Pecron E2000LFP have built-in MPPT controller?
A: Yes, there are two independent 600W (PV 32V-95V) MPPT charge controllers inside, and one step up 100W (PV 18V) MPPT charge controller. The Voc ( Open Circuit Voltage) of the solar panels should not exceed 95V.
Q: How to store the Pecron E2000LFP?
A: Please turn off the unit and then store it in a dry, ventilated place at normal room temperature. Do not place this unit near water sources or a wet/moist environment. For long-term storage, it is recommended to discharge the battery to 30% every three months and recharge it to 60% to prolong the battery life.
Helped you out?
Glad to hear that. It would be awesome if you could . . .