NOCO GENIUS5 6V/12V 5-Amp Smart Battery Charger User Guide

Download PDF user manual for NOCO GENIUS5 6V/12V 5-Amp Battery Charger, Battery Maintainer, and Battery Desulfator (EN|ES|FR) 36 pages GENIUS5.10102022B 2022 zip

SKU: NOCOGENIUS5UM Category: Brand:

Description

This PDF user guide is for the NOCO GENIUS5 6V/12V 5-Amp Battery Charger/Maintainer/Desulfator.

NOCO GENIUS5 6V/12V 5-Amp Battery Charger, Battery Maintainer, and Battery Desulfator

UPC: 0-46221-19004-5

Introducing the all-new GENIUS5, one of our most powerful, highest-performing, energy-efficient, and compact chargers yet. The GENIUS5 is a 6-volt and 12-volt battery charger, battery maintainer, and battery desulfator rated at 5-amps for lead-acid automotive, marine, and deep-cycle batteries, including flooded, gel, AGM, and maintenance-free, plus lithium-ion batteries.

Read and understand all safety information before using this product.
Please read the user guide before using this product and retain for future reference.

(PDF) USER GUIDE in English (EN), Español (ES), and Français (FR) languages.

CONTENTS:

– Important Safety Warnings
– How to use NOCO GENIUS5
– Charging Modes: Standby, 12V, 12V AGM, 12V LITHIUM, 6V Press & Hold (3 Seconds), Force Mode Press & Hold (5 Seconds), 12V REPAIR.
– Using 6V. [Press & Hold for 3 seconds]
– Using 12V Lithium.
– Force Mode. [Press & Hold for 5 seconds]
– Using 12V Repair. [From Standby Press and Hold 3 Seconds With Clamps Connected to the Battery]
– Connecting to the Battery.
– Begin Charging.
– Auto-Memory.
– Charging Times: Battery Size / Approx. Time to Charge In Hours

Understanding Charge LEDs:
– 25% Red LED: The 25% Charge LED will slowly pulse “on” and “off”, when the battery is less than 25% fully charged. When the battery is 25% charged, the red Charge LED will be solid.
– 50% Red LED: The 50% Charge LED will slowly pulse “on” and “off”, when the battery is less than 50% fully charged. When the battery is 50% charged, the red Charge LED will be solid.
– 75% Orange LED: The 75% Charge LED will slowly pulse “on” and “off”, when the battery is less than 75% fully charged. When the battery is 75% charged, the orange Charge LED will be solid.
– 100% Green LED: Pulsing Green LED – Bulk charge complete, optimizing battery for extended life. Solid Green LED – When the battery is 100% charged, the Charge LED will be solid green.
– Maintenance Green LED: After the battery is fully charged, the charger will continue monitoring the battery, and provide ongoing maintenance and optimization. The 100% Charge LED will pulse “on” and “off” slowly during these cycles. The charger can be left connected to the battery indefinitely.

Understanding Error LEDs:
– Standby LED Solid: Charger is in Standby mode or Battery voltage is too low for charger to detect.
– Overvoltage Error LED Solid: Battery voltage is too high for the selected charge mode / Check the battery and charge mode.
– Bad Battery Error LED Solid: Possible battery short / Battery will not hold a charge. Have battery checked by a professional.
– Reverse Polarity Error LED Solid: Reverse polarity / Reverse the battery connections.
– Overvoltage Error LED Bad Battery Error LED Reverse Polarity Error LED Flashing: Charger internal temperature too high / Charger will resume function once the Charger internal temperature drops. Charger ambient temperature too cold / Charger will resume function once the Charger ambient temperature rises.

Interface:
– Mode Button Push to cycle through charging Modes.
– Overvoltage Error LED Illuminates solid Red; Battery Voltage is above Protect voltage.
– Bad Battery Error LED Illuminates solid Red when connected battery will not hold a charge.
– Reverse Polarity Error LED Illuminates solid Red when reverse polarity is detected.
– Standby LED Illuminates when the charger is in Standby Mode, the charger is not charging or providing any power to the battery.
– Repair Mode LED Illuminates solid Red when Repair mode is selected.
– “Press and Hold” Mode LED Mode button must be pressed and held for 3 seconds to enter the mode.
– Mode LED Indicates the Charge Mode the charger is currently in. Push the MODE button to cycle through charge Modes.

– Technical Specifications
– Warranty

This user guide provides all the information (according to the table of contents) from NOCO about the GENIUS5 6V/12V 5-Amp battery charger/maintainer/desulfator, including answers to the questions listed above. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Helped you out?
Glad to hear that. It would be awesome if you could . . .

Support teklib.com