Humax HDR-1003S Twin Tuner VAST Satellite HD Recorder User’s Manual

Description

This PDF user manual is for the Humax HDR-1003S Twin Tuner VAST Satellite HD Digital Television Recorder.

Humax HDR-1003S Twin Tuner Satellite HD Digital Television Recorder (PVR)

HDR-1003S enables you to watch and record digital TV, use YouTube and iView and access content from your network and USB hard drives.

– The Viewer Access Satellite Television service, or VAST, is a satellite television platform in Australia, providing digital television and radio services to remote and black spot areas using the Optus C1 and Optus D3 satellite. It is partly funded by the Australian Government and managed through a joint-venture between Southern Cross Media and Imparja Television. It is a replacement for the Optus Aurora service and provides channels which have been absent on free-to-view satellite until now, such as a Network Ten affiliate, and the digital multichannels.
– Twin Tuner (Tri-Mode Enabled): Can’t decide on which show to record? Now there’s no need to choose between two shows. You can record both at the same time.
– Chasing & Time Shift Playback (2 hours buffering): You get to control time. Play back your show while it’s being recorded, pause it, and resume again when you’re ready. Or watch your favourite scenes again and again, and skip over parts you don’t want.
– Play media files: Access your digital media files from any drive in your home. Because our receiver can access your network, USB drive, or computer in your home, you can watch and listen to all your videos, photos, and music from one place.
– Home Networking: Play back a wide range of audio and video content from compatible devices in your home network.
– HDMI output: Just connect the High-Definition Multimedia Interface (HDMI) cable to any HD source and enjoy the optimized pictures and sounds each and every time.
– The best UI: EPG with all information you need including programmeinformation, date, time, and even classifications. Now with Auto refreshing EPG. After one time visit, EPG will be automatically refreshed without manual input. Easy EPG operation with better performance and accuracy.
– WiFi Adaptor: Plug in a USB Wi-Fi Adaptor to connect to your home internet. *Separate Purchase Required.
– Series Recording: Record your favourite series through one time set-up. Free series recording feature depends on broadcast network conditions and compatibility.

Please read this user’s manual carefully to be able to safely install, use and maintain the product at maximum performance. Keep this user’s manual next to your product for future reference.

(PDF) USER’S MANUAL in English (EN) language.

CONTENTS:

CONTENTS & ACCESSORIES
– Contents
– Accessories

QUICK START GUIDE
– Front. Inserting the Smartcard. Detaching the HDD Cartridge. Attaching the HDD Cartridge.
– Rear
– Remote Control
– Connections
– Wizard
– Programme Information (i-Plate)
– Channel List
– Edit Channels

TV GUIDE

RECORDING & PLAYBACK
– Recording
– Playback

MEDIA LIST

HUMAX TV PORTAL

PREFERENCES

INSTALLATION
– Search Channels [Fixed Antenna]
– Search Channels [SCD Antenna]
– Search Channels [Motor Antenna]
– Factory Default

SYSTEM

APPENDIX

– SPECIFICATION

– TROUBLE SHOOTING:
1. No message is displayed on the front display. (The product will not switch on.)
2. No picture
3. Poor picture/sound quality
4. No or poor sound
5. Remote control does not operate
6. Cannot make reservations
7. No password information is given
8. Channel search does not work
9. Cannot update new software
10. Cannot watch scrambled channels.
11. The product makes a humming noise.
12. Cannot record progammes. (PVR only)
13. Cannot operate Time Shifted Recording. (PVR only)
14. Cannot playback. (PVR only)
15. Cannot change channels while recording. (PVR only)

– HUMAX AUSTRALIA CUSTOMER SUPPORT

– ERROR MESSAGES:
No or bad signal [Satellite]
The channel is scrambled or not available.
The audio is not available.
No access
No card inserted
Incorrect card
CI-Module not installed
Invalid CI-Module
The antenna cable is short-circuited. [Satellite]

– Using the Universal Remote Control. Using the Universal Remote Control. Setting the Code Randomly. Finding Out the Code.

The Humax HDR-1003S default password is 1234.

This user’s manual provides all the information (according to the table of contents) from Humax about the HDR-1003S Twin Tuner VAST Satellite HD Digital Television Recorder (PVR), including answers to the questions listed above. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.

Download it by clicking the button below

Download file

Helped you out?
Glad to hear that. It would be awesome if you could . . .