Heatmiser neoHub (2nd generation) Smart Heating Hub Instruction Manual
Download PDF user manual for Heatmiser neoHub (2nd generation) Smart Heating Hub (EN) 3 pages Rev 1.4 zip
Description
This PDF instruction manual is for the Heatmiser neoHub (2nd generation) Smart Heating Hub.
Heatmiser neoHub (2nd generation) Smart Heating Hub
The neoHub Gen 2 handles all of the network communication between the neoStat & neoAir room thermostats and the smart plug “neoPlug” enabling you to control your multi zone heating, hot water and appliances from anywhere.
The neoHub enables the neoStat, neoStat-e, neoStat-hw, neoStat 12v , neoAir, neoPlug & neoUltra to work with HomeKit technology.
The neoHub Gen 2 connects to your home router by an ethernet cable, so one free port is required. The neoHub Gen 2 is very much plug and play and pairing neoStat’s, neoAir & neoPlug to the neoHub Gen 2 couldn’t be easier. After you have paired all of your Neo devices (up to 32 are supported) you will have In Home and Remote access of your heating, hot water and appliances.
(PDF) INSTRUCTION MANUAL in English (EN) language.
CONTENTS:
SETTING UP neoHub
neoHub is designed to be quick and simple to setup.
Just follow the quick start set up sequence and you will soon have total control over your home heating system.
SYSTEM REQUIREMENTS
CONNECT POWER
DOWNLOAD APPLICATION
ADD LOCATION
CONNECT TO neoHub
NAME YOUR neoHub
ADD ZONE
PAIRING MODE ACTIVE
ADD ANOTHER/FINISH
This instruction manual provides all the information (according to the table of contents) from Heatmiser about the neoHub (2nd generation) Smart Heating Hub, including answers to the questions listed above. You can download and save it for offline use, including viewing it on your device or printing it for your convenience if you prefer a paper version.
Download it by clicking the button below
Helped you out?
Glad to hear that. It would be awesome if you could . . .
